If you are working on a construction site, if you are a carpenter or some kind of repairmen, or even you just love to have all the tools, then there are certain tools you need to have in your collection in order to get the job properly done. When choosing the best circular saw to work with, you always have to make sure that the quality is really high for two reasons.
The first reason is, if the quality is good, there is a very small chance that you will hurt yourself while you are working on your project. The other very important reason is the fact that the job will be done flawlessly which is always best when top quality tools are used.
You will have much more projects to do if you pick your tools properly; because that is something you need to provide, and never to try to save some money on it. Great tools are always the best possible investment. On the list of most important tools there are drills and cordless circular saws. Even if you need the tools only for your home workshop, this is something you must have.
A hand held circular saw is for sure one of the most important tools you need to buy and own. But before you choose the right one for you, there are several things you should consider in order to make the best possible decision.
Quick Content Navigation
- Top 5 Rated Saws Comparison
- Milwaukee 6390-21 Circular Saw Reviews
- Makita 5007MG Review
- Festool TS 55 EQ Plunge Cut Saw Review
- DeWalt DWS535 Review
- DeWalt DW364K 7-1/4-Inch Saw Review
- Buyer’s Guide
Top 5 Rated Saws Comparison
*Results Are Based On Amazon.com Circular Saws Consumer Reports & Reviews*
Milwaukee 6390-21 7-1/4-Inch Tilt-Lok
4.4 out of 5 stars
140+ customer reviews
Makita 5007MG Magnesium 7-1/4-Inch
4.8 out of 5 stars
120+ customer reviews
Festool 561432 TS 55 EQ Plunge Cut
3.3 out of 5 stars
5+ customer reviews
DEWALT DWS535 7 1/4-Inch Worm Drive
4.7 out of 5 stars
170+ customer reviews
DEWALT DW364K 7-1/4-Inch with Electric Brake
4.6 out of 5 stars
110+ customer reviews
Milwaukee 6390-21 Circular Saw Reviews
Milwaukee 6390-21 7-1/4-Inch 15-Amp Tilt-Lok Circular Saw is perhaps one of the best circular saw currently on the market. For such a price, this beauty is a bargain! What are our reasons for such a claim? Keep reading to find out.
Have you ever found yourself in a situation where you need a tough work done fast, but your saw just isn’t fit to do the job? Let me tell you, you’re not alone… We’ve all been there.
But imagine instead your old saw, you were holding a brand new Milwaukee 6390-21! You could just feel the 3.25 horsepower motor cutting through any rough material with extreme ease and comfort. There’s no task big enough for this little 15amp powered beast. Moreover, you won’t just save your energy, you will save time as well. The Milwaukee 6390-21 cuts through anything with unbelievable speed while maintaining staggering precision! This great feature completely eliminates the time-or-quality factor, allowing you to enjoy both at the same time! What exactly makes Milwaukee 6390-21 so easy to work with?
- Spindle lock and quick-lock cord 3-1/4-horsepower 15-amp motor
- Tilting main handle and locking for comfort
- Soft-grip handle and aircraft aluminum shoe
- Kit includes blade, wrench, and case
One of the reasons is surely its unique user-friendly design. Weighing only 10.4 pounds (the lightest-weight saw in its class), the 6390-21 has a ‘Tilk-lok’ component which enables you to assume any working position you prefer, while automatically adjusting itself to the requirements. This means you no longer have to do a stunt to pull off a simple cutting task.
Another great feature is its blade bevel capacity which easily reaches 50 degrees and provides you with a clear line of sight, keeping you in total control all of the time. This ensures not only accuracy and precision, but safety as well. Furthermore, the handle can be cushioned in eight different ways. All these remarkable characteristics make the Milwaukee best circular saw for woodworking stand out from the crowd, with its particularly unique ability to adjust to the user needs.
Changing blades is as easy as changing babies diapers (just not as messy)! Thanks to the one-touch spindle lock, it can literally be done within seconds. Safety is not a problem either – a solid base plate and an excellent blade guard will make sure nothing ever happens to you, or your saw. Bevel and depth settings are also easy adjustable, thus once again making sure you end up with a precise cut each and every time! OK, so you might already be asking yourselves – where’s the catch?!
Well, there are a few negative points to Milwaukee 6390-21. One of them is a slightly oversized casing, which is responsible for taking up too much space once stored. Also, the blades are located on the right side of the saw, making it a little harder for the left handed individuals to operate. However, these minor drawbacks cannot possibly measure against the power and flexibility of this machine. Milwaukee 6390 comes with a 5 year warranty, making sure that by purchasing – you have nothing to lose and everything to gain!
As far as the Milwaukee circular saw user reviews goes, there are over 140 of them on Amazon.com. From those, 76% of users gave it a 5 star rating. It has a 4.5 out of 5 rating which makes this the top choice for the best cordless circular saw.
Makita 5007MG Review
The Makita 5007MG is perhaps best known for its power, stability, speed and precision, while simultaneously managing to stay in an affordable price range. This saw will satisfy anyone’s needs, no matter what the requirements or how high the expectations may be. It is no exaggeration to say that this is one of the top saws in its class.
Equipped with an amazing 15-amp, 5800RPM motor, Makita 5007MG delivers enough power to make any seemingly hard and complicated job fun and enjoyable. It can tackle even the most demanding applications such as framing walls, floors, roofs, ripping panels, plunge, bevel and metal cutting with complete ease!
The power is further enhanced by a Makita 7-1/4-Inch Premium Ultra-Coated Framing Blade with an advanced tooth design. This carbide-tipped blade is designed to endure even the most hostile working environment and still come out with clean, precise and long-lasting cuts. Also, an integrated blade-wrench makes blade-changing a breeze! Makita 5007MG has a weight of only 10.1 pounds. It is mind-boggling how something so powerful can weigh so little! The secret, however, is not in the motor – it’s in the light, yet extremely durable magnesium base. This makes the handling so much easier as it increases the comfort, and therefore the very performance of this remarkable saw.
Another great feature is the 56 degrees maximum bevel capacity which is perfect for improving visibility and adding additional sense of control. Moreover, the saw has positive stops at 22.5, 45 and 56 degrees. The number markings in a shape of ruler on the base of the saw are very easy to read and enable depth adjustment and precise cut measurement.
The handle is quite spacey, so there’s more than enough room for a gloved hand to fit in nicely. It is also ergonomically cushioned for enhancing the comfort even more.
This Makita mini circular saw has a carefully reinforced cord cable which prevents job-site abuse. Often, these saws are simply taken by their cords and lowered down on the ground, without worrying about the potential damage that can occur. However, with this feature, such problems are almost eliminated and it is much safer to handle the saw by its cord (although not recommended).
But that’s not all! – 2 integrated LED lights will provide a rather nice illumination and the ducting is designed to blow the saw-dust away from the user.
So, you ask yourself – where’s the catch? Truth is, there is no catch. It has over 100 reviews and 72% of those are a 5 star rating. With a 4.8 stars out of 5 makes this Makita saw one of the best there is.
There are only a few suggestions to be made. One thing that would sure benefit this saw is an electric powered brake which saves time and enables repetitive cutting. However, with an included hex blade wrench, rip fence, tool case and a 1 year warranty with 90 days money-back guarantee – there’s simply nothing to complain about!
Festool TS 55 EQ Plunge Cut Saw Review
If you were to buy the best worm drive circular saw, what characteristics would you look for? Would you look for power, speed and precision? Or would you rather have it comfortable and easy on the hand? What if you could have it both? With a little bit of research and reading a lot of saw reviews, you could easily find one that incorporates all of these characteristics. However, quality often comes with a price.
The Festool TS 55 EQ Saw is admittedly not the cheapest saw on the market, but its price holds a tremendous value. Let’s examine the pros & cons…
Packed with an extremely powerful triple bearing motor, there’s absolutely nothing that the Festool TS 55 EQ can’t cut through. Whether you’re a professional carpenter or a handyman, this saw is guaranteed to produce excellent results. The saws blade speed can be manually adjusted from 2,000 – 5,200 RPM, depending on your requirements. This enables you to achieve precise, clean cuts, as you can pinpoint the exact RPM depending on the material you need to cut (not many saws offer this feature).
The 48-tooth blade is carbide-tipped, meaning that you can use it under the toughest working conditions and it will still remain as sharp as new. When you wish to remove and replace it, you can do it in a matter of seconds thanks to an integrated FastFix blade changing system. It works by locking both the power and the arbor switch.
Weighing in at approximately 9.92lbs, the Festool is ranked in the middle light class of best budget circular saw. It is therefore easy to handle and won’t cause too much fatigue. This is yet another plus with regards to the increased performance and productivity.
Although the weight itself can have its pros and cons, it most often comes down to a matter of preference. Some people prefer heavier saws because they eliminate the effect of kickbacks. However, the Festool TS 55 has an integrated kickback prevention system. Thanks to a built-in splitter-knife which keeps the cut open, the safety is greatly increased and the kickbacks are more or less eliminated.
The cutting depth can be adjusted with a millimeter precision. With a maximum cutting depth of 2-1/8 inches without a guide rail and 1-15/16 inches with a guide rail, you’ll have more than enough capacity to do your work. The guide rails will also ensure that your cut lines are 100% straight and accurate.
The saw is designed for a truly large variety of applications. Plunge-cutting with the Festool TS 55 EQ is a breeze. It can also be used for flooring, cut-outs and finishing.
A splinter-guard system ensures that the cut line is clear and splinter-free on both sides.
It is very hard to find a flaw in such a beautiful, powerful circular saw. But as with all high quality products, price is often the biggest problem. The Festool TS 55 EQ is truly a remarkable saw that will leave no one disappointed, but is in turn quite pricy (>$500). At the moment due to the higher price it has only a few reviews from users and a not so great user rating (a just 3.2 star rating out of 5).
We think that for that price you can always find something better for you so we do not recommend this as your first choice. However, if you are a fan of Festool brand feel free to get it, because in the end Festool si known to make top quality tools so we think that you will not be disappointed.
DeWalt DWS535 Review
Are you looking for a solid, heavy-duty circular saw that cuts through everything with ease and never breaks down? Well, that’s going to be very hard to find, but DeWalt DWS535 7 1/4-Inch Worm Drive Circular-Saw might just be the next best thing! DeWalt has a reputation of making saws specifically designed to meet the end-users needs. Let us examine it closely
The upsides of DeWalt DWS535
DeWalt DWS535 is a worm-drive circular saw. How is a worm-drive saw different from a normal circular saw?
Well, for starters – its shape transfers a lot more power to its blades and therefore makes it able to cut through hard materials easier than the normal circular saw would. However, speed is often compromised. Worm-drive saws have a significantly slower cutting speed, but this is almost irrelevant compared to the power they add.
Light, yet powerful DeWalt DWS535 is perfect for handling and storage. Weighing in around 13.8 pounds, the saw takes a middle class weight. Its 15-amp 4800RPM (no-load speed) motor makes sure cutting is both easy and smooth. Durable magnesium shoe realizes a solid quality cutting platform.DeWalt DWS535 circular saw has a 2-7/16-inch cut depth at 90 degrees and a 1-7/8-inch cut depth at 45 degrees. Its bevel capacity reaches up to class-leading 53 degrees! Also, it has a built-in default bevel detents at 22.5 and 45 degrees (most commonly used angles). It is very well balanced in terms of weigh-to-power ratio and has a nice, ergonomic grip to it, which is very important because it provides the user with comfort. Due to the saws torque, it has a very little lateral twist, unlike some other similar saws.
The spindle lock feature makes changing blades a breeze! It also minimizes the downtime and therefore increases the saws efficiency. DeWalt DWS535 has an extra wide saw hook that handles material up to 2-1/2 inches wide. Also, the dual ports in the shoe are made for precise rip cuts up to a 14-1/2 inch capacity.
Toughcord retention and protection system is perhaps the most interesting feature of DeWalt circular saws. Because the saws are most often lowered down by their cords, all the jerking eventually compromises the quality of the cord and you soon have to replace it. DeWalt has come up with a Toughcord system that has up to 4x times stronger jerk protection and therefore increases its overall durability.
Sold separately, you can also get the rip fence along the saw. This is a great addition because it gives you a long fence to ride against and enables you to cut precisely measured strips. The overall conclusionDeWalt DWS535 is a very powerful machine and has all the characteristic of a top quality worm-drive circular saw. With hardly any complaints out of over 160 saw reviews and a 4.8 star rating out of 5 , this saw is absolutely recommended for any serious carpenter out there.
It is also backed by a three-year warranty and a 90-days money back guarantee. You’ve got nothing to lose and everything to gain – give it a try, you’ll be glad you did!
DeWalt DW364K 7-1/4-Inch Saw Review
DeWalt circular saws have been around for quite some time, and they have never once turned out to be disappointing. In fact, along with Milwaukee, Makita, Festool and Bosch – DeWalt is one of the best brands of circular saws that you can get at this price range. Their famous motto is ‘Toughness Guaranteed’, which should give you a pretty clear picture of how ‘tough’ their products are.
DeWalt saws are carefully designed with keeping the end-users needs in mind. Their crew actually goes to the job sites, notices what kind of problems people are having, and then takes that as a pattern to build their next products on. The DW364K is one of those top products.
What are the upsides?
DeWalt DW364K can certainly brag about its 2-3/4 horse power which enables the user to cut wood as easily as a knife cuts through butter. Its heavy gauge, aluminum alloy base takes care of the ‘toughness’ part. A well protected top cutting tool with such power can only be messed up by rough and imprecise cuts. However, this is not the case with the DW364K Saw!
This saw introduces a unique feature of rear pivot depth-of-cut adjustment which enables the user to set the required depth without actually removing his hands from the handle! Imagine how much more control you can have and how much time you can save. Not only that, but it also has an electric powered brake which stops the blades in a split of a second, which is great for making repetitive cuts and not to mention the extra safety bonus.
DeWalt DW364K weighs 12.3 pounds, which doesn’t make it an absolute light weight champion, but power never comes in small packages. The weight adds that additional balance to it, making it nice and comfortable to handle. Its aluminum alloy base makes sure nothing ever happens to it if it falls down or takes any kind of physical impact.
Needless to say, the bevel capacity of an amazing 50 degrees makes the job a whole lot easier because you have a nice clear line of sight and you can always know what’s going on. DeWalt DW364K also has a shaft lock button that is very easy to reach and makes blade-changing a whole lot faster and simpler.
What are the downsides?
One of the first things that most people are uncomfortable with is its weight. Compared to other models, this circular saw could certainly weigh a little less. Strangely, this same feature makes others excited because apparently it provides the user with a sense of high power. Also, like with any other saw, the included blades could be a bit sharper and many recommend buying a separate set of blades in addition to the saw.
There’s one thing that can be claimed with absolute certainty as the well over 100 user circular saw reviews say – this saw will not let you down. It has all the power, stability, balance and durability you need. It also comes with an included warranty so you can set your mind at ease when purchasing.
The fact you need to know, is that if the motor has more power you will have much more control when you cut, which is very important. Always ask about the motor power and how fast it will turn the blade.
Battery life and its charging time is very important. One of the best batteries for these kinds of saws is a 18v lithium-ion battery.
There are so many different models of these saws available, so when choosing the circular saw that you want to buy, pay attention to some extra features that will increase the safety and easy of use.
Cordless Vs Corded
If the saw you already have is too old, and you want to buy a new one, a small circular saw should be your option. The main benefit of using the best circular saw is the fact you will be able to cut practically any material you want anywhere you want. The other benefit is that these saws are high quality tools, and will last for years to come, plus – these saws are pretty affordable.
Last update on 2017-09-22 / Affiliate links / Images from Amazon Product Advertising API